Table of Contents
Advertisement
9
PROGRAMMING USING BUS INTERFACE
FUNCTIONS
(3) Symbol information synchronization setting
9
- 41
9.7 Precautions for Program Debugging
9.7.2 For the Q06CCPU-V(-B)
To debug the user program, the symbol information of the C Controller module and
that of the development environment (personal computer) must be synchronized.
1) Start Tornado.
2) Select [Tools] [Target Server] [Configure] to open the "Configure Target
Servers" dialog box.
3) Select "Core File and Symbols" in the "Target Server Properties" pull-down
menu.
4) Check the "Synchronize Target/Host Symbol Tables" checkbox.
OK
5) Click the
button.
Figure 9.8 Symbol information synchronization setting
6) Select [Tools] [Options] from the menu bar to open the "Options" dialog box,
and select the "Tornado Registry" tab.
7) Select the "Remote registry" radio button and specify the IP address or host
name of the development environment (personal computer).
OK
8) Click the
button.
Figure 9.9 Development environment (personal computer) IP address setting
3)
4)
7)
Advertisement
Table of Contents
