Table of Contents
Advertisement
4
C CONTROLLER SETTING UTILITY
IP address
Clock
MD function
Item
SW3PVC-CCPU communication
setting
Priority
Default
button
Set
button
(d) Option tab
The priority of processing for communications with the C Controller module can be
set in this tab.
Table 4.20 Description of the Option tab
Option
Set the processing priority for communications with the C Controller module.
The smaller the value, the higher the priority. Conversely, the larger the value, the
lower the priority.
"Priority" setting may affect the communication between each utility and a C
Controller module or behavior of the user program.
•Priority for utility........
•Priority for user program...
(Default: 99, Setting range: 99 to 255)
Changed the settings back to default.
Write the "Priority" data into the C Controller module.
The "Priority" takes effect after powering off and on or resetting the C Controller
module.
1) "Priority" for "SW3PVC-CCPU communication setting"
• The default setting can be used for normal system operation.
• Change the "Priority" value when the default value may affect the behavior
of user programs.
Note that changing "Priority" value may cause timeout in a communication
between utility and the C Controller module.
Figure 4.22 Option tab
Description
Page 4-29, Section 4.6 (3) (d) 1)
Page 9-26, Section 9.6
4.6 Online Operation Tab
1
2
3
4
Reference
page
5
6
7
8
4
- 29
Advertisement
Table of Contents
