6
MELSECNET/H UTILITY
6.2
Module Information Tab
The Module information tab displays information of the MELSECNET/H module (host
station) controlled by the connected C Controller module.
(1) Precautions for the Module information tab
(2) Module information tab
Module information
Item
Link device refresh time
Max.
Min.
(a) When a utility communication error has occurred
When a utility communication error has occurred during connection, click the
Start monitoring
button or set the connection target again in the Connection
settings so that the communication can be restarted.
(b) During reset
Communications are not available while the C Controller module is being reset.
Start communication after the reset is complete.
Table 6.2 Description of the Module information tab
Error history monitoring
Other station monitoring
Description
Displays total link device refresh time required to refresh the
MELSECNET/H and CC-Link IE Controller Network controlled by the C
Controller module (host CPU). (In increments of ms)
Displays the maximum total link device refresh time in the past record.
"-" appears when Link device refresh cycle (
6.6) is 0ms.
Displays the minimum total link device refresh time in the past record.
"-" appears when Link device refresh cycle (
6.6) is 0ms.
Q12DCCPU-V
Figure 6.1 Module information tab
Page 6-27, Section
Page 6-27, Section
6.2 Module Information Tab
Q06CCPU-V
Q06CCPU-V-B
Corresponding
Corresponding
SB
SW
(To the next page)
6
- 2
1
2
3
4
5
6
7
8