Mitsubishi Electric Q12DCCPU-V User Manual page 58

3
COMMON UTILITY OPERATIONS
3
- 8 3.5 Setting Connection Target
(a) Detailed settings screen
Enter values in "Communication check time" and "Retry count" used in Ethernet
communication between a development environment (personal computer) and the
C Controller module.
Item
Communication check
time
Retry count
OK
button
Cancel
button
Default
button
POINT
Communication errors may occur in Ethernet communication between the
development environment (personal computer) and the C Controller module
depending on the line status. When a communication error has occurred, increase
the setting value for "Communication check time" and/or "Retry count".
Figure 3.6 Detailed settings screen
Table 3.5 Description of the Detailed settings screen
Set a communication check time in Ethernet communication between
the development environment (personal computer) and C Controller
module. (Unit: seconds)
(Default: 10, Setting range: 1 to 360)
Set the number of retries in Ethernet communication between the
development environment (personal computer) and C Controller
module.
(Default: 2, Setting range: 0 to 9)
Enables the current settings and closes the Detailed settings screen.
Closes the Detailed settings screen without enabling the settings.
Sets the values entered in "Communication check time" and "Retry
count" back to default.
Description