Table of Contents
Advertisement
6
MELSECNET/H UTILITY
6.4
Other Station Monitoring Tab
The Other station monitoring tab displays the status of the other stations (MELSECNET/H
network stations).
(1) Precautions for the Other station monitoring tab
(2) Other station monitoring tab
Module information
Error history monitoring
Item
Select the MELSECNET/H module for monitoring.
Target module
(Default: 1)
Starts or stops monitoring the MELSECNET/H module.
Start monitoring
or
"*" flashes in the upper right of the button during monitoring.
Stop monitoring
button
These buttons are disabled in the offline status.
(a) Monitoring status
When MELSECNET/H utility is started, monitoring is in stop status.
Start monitoring
Click the
(b) When a utility communication error has occurred
When a utility communication error has occurred during connection, click the
Start monitoring
button or set the connection target again in the Connection
settings so that the communication can be restarted.
(c) During reset
Communications are not available while the C Controller module is being reset.
Start communications after the reset is complete.
Table 6.10 Description of the Other station monitoring tab
Other station monitoring
Description
Q12DCCPU-V
button to start monitoring.
Figure 6.7 Other station monitoring tab
6.4 Other Station Monitoring Tab
Q06CCPU-V
Q06CCPU-V-B
Corresponding
Corresponding
SB
SW
(To the next page)
6
- 14
1
2
3
4
5
6
7
8
Advertisement
Table of Contents
