Table of Contents
Advertisement
11
PROGRAMMING USING VxWorks API FUNCTIONS
CHAPTER 11 PROGRAMMING USING VxWorks API
For the component list and information checking method of the VxWorks component
implemented in the C Controller module, refer to the following.
For each component functionality and VxWorks API functions, refer to the manual for
VxWorks.
(1) Sample program using VxWorks functions
(2) Precautions for using VxWorks API functions
(3) Precautions for the Wind River Systems product
11
- 1
FUNCTIONS
Page APPX-1, "Appendix 1 VxWorks Component List"
Installing SW3PVC-CCPU registers the sample programs of the following functions.
(
Page 12-1, CHAPTER 12)
• The Connect function between C Controller module and GOT (Microcomputer
connection)
• The RAM disk function
(a) Changing the system clock rate
The C Controller module supports system clock rate of 60 to 1000. (Default: 60)
When changing the system clock rate, use the sysClkRateSet function.
For setting and changing the system clock rate, refer to the manual for VxWorks.
We, Mitsubishi, make no warranty for the Wind River Systems product and will not be
liable for any problems and damages caused by the Wind River Systems product
during use of the C Controller module. For the problems or specifications of the Wind
River Systems product, refer to the corresponding manual or consult Wind River
Systems, Inc.
Contact information is available on the following website.
www.windriver.com
Q12DCCPU-V
Q06CCPU-V
Q06CCPU-V-B
Advertisement
Table of Contents
