Table of Contents
Advertisement
PRECAUTIONS
A
- 6
The following precautions are given in this section.
For installation, uninstallation
For each utility
For programming
For debugging a program
For using FTP
For the Wind River Systems product
(1) Precautions for installation and uninstallation
(a) Installation by overwriting
• When installing utility by overwriting, the same folder where the existing one
is installed must be used.
Any other folders cannot be used.
• Installation by overwriting is available only onto the same version of
SW3PVC-CCPU.
To install another version of utility, uninstall existing one before installation.
(b) Uninstallation
Do not terminate uninstallation during processing.
If terminated, redo the uninstallation all over again.
If the uninstallation fails after terminating the uninstallation, reinstall the software
and then uninstall it again.
(2) Precautions for utility
(a) Communication error of utility
When the line is congested, communication errors (time out errors) are more likely
to occur (monitoring stops if running) in each utility.
If a utility communication error has occurred, set the connection target again in
Connection setting.
(b) Connection during script file processing
Connection from utility to a C Controller module may not be available during
processing a script file (while the RUN LED is flashing).
Finish the script file processing before connecting utility to a C Controller module.
If the RUN LED remains flashing, refer to the C Controller Module User's Manual
(Hardware Design, Function Explanation) and troubleshoot the problem.
(c) Terminating Microsoft
Do not terminate Microsoft
utility is running.
Terminate all the running utility (other than Device monitoring utility) first and then
®
Microsoft
Windows
Precautions
®
®
Windows
®
®
Windows
while utility other than Device monitoring
®
.
Reference page
Page A-6
Page A-6
Page A-7
Page A-11
Page A-16
Page A-16
Advertisement
Table of Contents
