Mitsubishi Electric Q12DCCPU-V User Manual page 186

7
CC IE CONTROL UTILITY
Module information
Item
Link device refresh time
Displays the current total link device refresh time.
Current
When Link device refresh cycle (
appears.
Displays the "CC IE Control Network diagnostics result" screen.
Diagnostics
button (
This button cannot be clicked in the offline status.
Starts or stops monitoring the CC-Link IE Controller Network module.
Start monitoring
or
"*" flashes in the upper right of the button during monitoring.
Stop monitoring
button
These buttons are disabled in the offline status.
Displays CC-Link IE Controller Network module information in order of
1 Slot to 4 Slot
start I/O No.
Start I/O No. Displays the start I/O No. of the CC-Link IE Controller Network module.
Displays the channel No. of the CC-Link IE Controller Network module.
Channel No.
When the "Channel No." parameter is not specified (
Section 7.5), "-" appears.
Displays the network No. of the CC-Link IE Controller Network module.
Network No.
When the "Network No." parameter is not specified (
Section 7.5), "-" appears.
Displays the group No. of the CC-Link IE Controller Network module.
Group No.
When the "Group No." parameter is not specified (
Section 7.5), "-" appears.)
Sta. No. Displays the station No. of the CC-Link IE Controller Network module.
Type Displays the type of the CC-Link IE Controller Network module.
Displays the communication status of the CC-Link IE Controller Network
module as one of the following.
• In data link
• Suspend data link
Status
• Baton passing
• Suspend baton pass
• Offline testing
• Offline
Displays the link scan time of the CC-Link IE Controller Network module.
Link scan time
(In increments of ms)
Saves information of the CC-Link IE Controller Network module's link
Save SB/SW
button special relay (SB) and link special register (SW) into a CSV file. (
Page 7-4, Section 7.2 (3))
7
- 3 7.2 Module Information Tab
Table 7.2 Description of Module information tab (continued)
Online operation Parameter settings
Description
Page 7-5, Section 7.3)
Target settings
Page 7-23, Section 7.5) is 0ms, "-"
Page 7-23,
Page 7-23,
Page 7-23,
Corresponding Corresponding
SB SW
SW0040
SW0041
SW0042
SB0044
SW0047