Table of Contents
Advertisement
6
MELSECNET/H UTILITY
6
- 7
6.2 Module Information Tab
(a) Reason for transmission interruption
The following lists the display in Reason for transmission interruption.
Table 6.5 Details of Reason for transmission interruption
Display
Normal
Offline
Offline test
Initial status
Shift control station
Online testing
Baton disappearance
Baton repetition
Same station present
Control Station repetition
Reception retry error
Transmission retry error
Timeout error
Link error
Disconnecting
No baton to own station
Error code: XXXX
(b) Cause of transmission stop
The following lists the description of display in the Reason for transmission stop
field on the screen.
Display
Normal
Stop instruction present (All)
Stop instruction present
(HostSelf)
Stop instruction present
(Station
)
No parameter
Illegal parameter
Connected CPU error
Suspend communication
Communicating normally
Offline
Offline test being conducted.
Error occurred. (Error code: F101, F102, F105)
Error occurred. (Error code: F104, F106)
Error occurred. (Error code: F103, F109, F10A)
Error occurred. (Error code: F107)
Error occurred. (Error code: F108)
Error occurred. (Error code: F10B)
Error occurred. (Error code: F10C)
Error occurred. (Error code: F10E)
Error occurred. (Error code: F10F)
Error occurred. (Error code: F110)
Error occurred. (Error code: F112)
Error occurred. (Error code: F11B)
Error occurred. (Error code: F11F)
Error (Refer to the displayed error code)
Table 6.6 Details of Reason for transmission stop
Communicating normally
Cyclic transmission of all stations was stopped from the own or
other station.
Cyclic transmission of the own station was stopped.
Cyclic transmission of the own station was stopped from the other
station (Station No.
No parameter can be received.
The set parameter is invalid.
Medium or critical error has occurred on the CPU module in the
own station.
Data link error occurred on the own station.
Description/Action
Description
).
Advertisement
Table of Contents
