7
CC IE CONTROL UTILITY
CHAPTER 7 CC IE CONTROL UTILITY
7.1
CC IE Control Utility Function List
Name
Specify CPU type
Specifies a C Controller module for parameter setting and monitoring.
Sets the C Controller module to which CC IE Control utility is to be
Connection settings
connected.
Parameter setting file
Saves parameters set in CC IE Control utility into a file or loads the file.
saving/loading
Module information
Displays information on the CC-Link IE Controller Network module (own
display
station) that is controlled by the connected C Controller module.
Online operation
Reads, writes, or verifies CC-Link IE Controller Network parameters.
Parameter settings
Sets parameters for the CC-Link IE Controller Network modules.
Sets a logical station number for access to a CPU module in a multiple
Target settings
CPU system when a CC-Link IE Controller Network module is mounted in
the system.
7
- 1
7.1 CC IE Control Utility Function List
Table 7.1 CC IE Control utility function list
Description
Q12DCCPU-V
Q06CCPU-V
Applicability
Q12DCCPU
-V
: Applicable,
: Applicable but partially restricted,
Q06CCPU-V-B
Reference
Q06CCPU
page
-V
Page 3-4
Page 3-5
Page 3-14
Page 7-2
Page 7-20
Page 7-23
Page 7-34
: N/A