Mitsubishi Electric Q12DCCPU-V User Manual page 273

9
PROGRAMMING USING BUS INTERFACE
FUNCTIONS
5) Set "Backend settings" as follows.
Item
Backend:
Cpu:
Target name / IP address:
Port:
6) Select the "File" radio button in the "Kernel image" field and click the
button.
7) Select "*" in "Files of type" to select the VxWorks image file and click the
Finish
button.
For the folder where the VxWorks image file is stored, refer to the following.
Page 9-33, Section 9.7.1 (1) (b)
Table 9.4 Backend settings
Value
wdbrpc
SH-4A
192.168.3.3
(If the IP address of the C Controller module has been
changed, enter the latest one.)
" " blank
9.7 Precautions for Program Debugging
9.7.1 For Q12DCCPU-V
9
10
11
Browse
12
13
A
I
9
- 32