Table of Contents
Advertisement
12
SAMPLE PROGRAMS
Folder name
CCIEField\
LocalStation
CCIEField\
MasterStation_Loc
alStation
CCIEField\
MasterStation_Rem
oteIO
Others
FTPGet.c
MakeRAMDisk.c
QD75Status.c
QPParamSet.c
SntpTimeSet.c
CFChange
EntryWDTInt
QBFtest
MotionLink
QBFMessage
Shutdown
LoginUserRegist
ParamBackUp
Script
ParamRestore
ROMFormat
Remark
Table 12.2 Registered sample programs (continued)
File name
For performing cyclic transmission with the master station in the CC-Link IE Field
LocalStation.c
Network (local station).
MasterStation_Loc
For performing cyclic transmission with the local station in the CC-Link IE Field
alStation.c
Network (master station).
MasterStation_Re
For performing cyclic transmission with the intelligent device station in the CC-
moteIO.c
Link IE Field Network (master station).
FTPGet.c
For FTP communication
MakeRAMDisk.c
For RAM disk creation
For 1-shot monitoring of the positioning module status (current feed value, axis
QD75Status.c
error No., and axis warning No.)
For automatic transfer of the parameter file created in GX Configurator-QP to a
QPParamSet.c
positioning module
SntpTimeSet.c
For setting clock data by acquiring the data from the SNTP server computer
For unmounting a CompactFlash card when X0 turns on
CFChange.c
For the Q06CCPU-V-B, this sample program cannot be used.
EntryWDTInt.c
For user watchdog timer error interrupt registration
MotionLink.c
The linkage with the Motion CPU is used for this sample program.
QBFMessage.c
For sending messages via MELSECNET/H
ROMShutdown.c
For shutting down the standard ROM when X0 turns on
STARTUP.CMD
Sample script file for login user registration
STARTUP.CMD
Sample script file for parameter backup
STARTUP.CMD
Sample script file for parameter restoration
STARTUP.CMD
Sample script file for standard ROM formatting
Sample programs which cannot be used in the C Controller module contain the
notification message as shown below.
/**************************************************************************/
Sample program
/*
When X0 is ON, unmount the CF card.
/*
Note)
/*
This sample program cannot be used because
/*
Q06CCPU-V-B does not support CF card interface.
/*
If the following functions are executed, unsupported
/*
communications path error (19203 [0x4B03]) will be
/*
returned.
/*
Figure 12.1 A sample program which cannot be used in the Q06CCPU-V-B
Description of sample program
9
10
11
12
13
*/
*/
A
*/
*/
*/
*/
*/
*/
I
12
- 4
Advertisement
Table of Contents
