4
C CONTROLLER SETTING UTILITY
4.12
System Menu
(1) System menu
Item
Move, Minimize, Close
Specify CPU type
CC-Link utility
MELSECNET/H utility
CC IE Control utility
Device monitoring utility
Version information
4
- 46
4.12 System Menu
System menu in C Controller setting utility can be accessed either in the following
three way.
• Right-click on the title bar.
• Click the (
) icon on the title bar.
• Press the [Alt] key and then the [ ] key.
®
• For Windows
7 or later, right-click the icon (
the [Shift] key.
Figure 4.34 System menu
Table 4.31 Description of the System menu
Refer to manuals for Microsoft
Specifies a C Controller module to which parameters are set or to be monitored.
This item cannot be selected during monitoring.
Starts CC-Link utility.
When C Controller setting utility is connected online, this utility is started with the
same connection target connected.
Starts MELSECNET/H utility.
When C Controller setting utility is connected online, this utility is started with the
same connection target connected.
Starts CC IE Control utility.
When C Controller setting utility is connected online, this utility is started with the
same connection target connected.
For the Q06CCPU-V-B, this utility cannot be used.
Starts Device monitoring utility.
When C Controller setting utility is connected online, this utility is started with the
same connection target connected.
For the Q06CCPU-V-B, this utility cannot be used.
Opens the version information screen.
Q12DCCPU-V
) on the task bar while pressing
Description
®
®
Windows
.
Q06CCPU-V
Q06CCPU-V-B
Reference
page
Page 3-4
Page 5-1
Page 6-1
Page 7-1
Page 8-1
Page 4-47