Online Operation Tab - Mitsubishi Electric Q12DCCPU-V User Manual

6
MELSECNET/H UTILITY
6.5

Online Operation Tab

MELSECNET/H parameters can be read, written, or verified from this tab.
(1) Precautions for the Online operation tab
(2) Online operation tab
Online operation
Item
Target drive
Read parameters
Read button
6
- 25 6.5 Online Operation Tab
(a) When a utility communication error has occurred
When a utility communication error has occurred during connection, set the
connection target again in the Connection settings so that the communication can
be restarted.
(b) During reset
Communications are not available while the C Controller module is being reset.
Start communications after the reset is complete.
(c) The drive to which parameters are written
When writing parameters from each of the utilities to the following C Controller
module, write them to the same drive.
• Q12DCCPU-V whose serial No. (first five digits) is "12042" or later
If the parameters are written to different drives, those of the drive, which include C
Controller setting parameters, will take effect.
Table 6.21 Description of the Online operation tab
Parameter settings Target settings
Set a target drive for reading, writing, or verifying parameters.*1
This setting is not available for the Q06CCPU-V(-B).
(Default: Parameter boot drive)
Reads out MELSECNET/H parameters from the C Controller module.
* 1 For the drives to which parameters can be written (user memory), refer to the C Controller Module
User's Manual (Hardware Design, Function Explanation).
Q12DCCPU-V
Figure 6.17 Online operation tab
Description
Q06CCPU-V Q06CCPU-V-B
(To the next page)