Chapter 14 Troubleshooting; Checking Error Codes In The Module's Detailed Information Window Of Gx Works2 - Mitsubishi Electric MELSEC-L Series LD40PD01 User Manual

14
TROUBLESHOOTING
This chapter describes errors that may occur while the flexible high-speed I/O control module is being used, and those
troubleshooting.
Checking error codes
Check the error codes of the errors that occur in the flexible high-speed I/O control module with one of the following methods.
Select a method depending on the application or purpose.
Page 231 Checking Error Codes in the Module's Detailed Information Window of GX Works2
Page 232 Checking Error Codes with Latest Error Code (Un\G100)
Page 233 Checking Error Codes with the Module Error Collection Function of GX Works2
Page 208 Checking and Clearing Errors
14.1
Checking Error Codes in the Module's Detailed
Information Window of GX Works2
This section describes how to check errors in the Module's Detailed Information window of GX Works2.
[Diagnostics]  [System Monitor]
1.
Select the flexible high-speed I/O control module in
"Main block" and click the [Detailed Information] button.
2.
The "Module's Detailed Information" window of the
flexible high-speed I/O control module is displayed.

14.1 Checking Error Codes in the Module's Detailed Information Window of GX Works2

14 TROUBLESHOOTING
231
14