Waveform Editing - Unipulse f395 Operation Manual

14-4. Waveform Editing

Confirm or edit a waveform on this screen. The waveform can be edited by area setting,
tie drawing, and shifting, and the waveform can be registered by waveform save. Also,
the waveform can be confirmed by scrolling, scaling up/down, and moving the cursor.
1. Area setting key - - - - - - - - - Goes to the area setting screen.
2. Tie drawing key - - - - - - - - - Goes to the tie drawing screen.
3. Shift key - - - - - - - - - - - - - - Goes to the shift screen.
・When two or more samplings are performed, the upper limit
and lower limit of the waveforms obtained by sampling are
registered as the high limit and low limit, respectively.
Example: 4th samplings
・ When waveform sampling is executed, OK is output as a
judgment result without performing judgment operation (when
"SAMP" is displayed).
⑦
⑧
⑨
⑯
Red line: High limit waveform
1st time
Blue line: Latest sampling waveform
3rd time
2nd time
Red line: Low limit
① ② ③ ④
⑩ ⑪ ⑫
(See "14-4-3. Area Setting" P90.)
(See "14-4-1. Tie Drawing" P86.)
(See "14-4-2. Shift" P89.)
14.Waveform Editing
(4th time)
⑤ ⑥
⑭
⑮
⑬
84