Unipulse f395 Operation Manual page 24

ⅱ Hold status display
ⅲ High and low limits / NOV RAM writing display
ⅳ ch display
Displays the ch set by external input (operation ch).
7. Set operation mode display
Displays the currently set Operation Mode.
8. Control signal display
Displays the T/H and H/M input status. (See "15-8. Control Signal Display" P99)
9. Display of high and low limit set values
Displays the High and Low Limit Set Values of the ch (operation ch) set by external input in the
Multi-Hold mode. (See "16-2-7. High Limit / Low Limit / HI-HI/LO-LO Mode / HI-HI Limit /
LO-LO Limit" P109), and displays the comparison waveform of the currently set opera-
tion ch in the Waveform Comparison / Waveform and Displacement Comparison mode.
(See "13-1. Function" P68.)
WAIT : In tracking display
DETECT : In hold detection period.
HOLD : In data hold.
NOV : In NOV RAM writing.
HH : Indicated value > HI-HI Limit set value
HI : Indicated value > High Limit set value
OK : Neither of the High and Low Limits is exceeded.
LO : Indicated value < Low Limit set value
LL : Indicated value < LO-LO Limit set value)
Priority : NOV = HH = LL > HI = LO > OK
Operation mode
Multi-Hold
Hysteresis
Hysteresis 2
Waveform Comparison
Waveform and
Displacement Comparison
2.Name and Function of Each Part
Status display
HI LO
or
OK
HH LL
or
OK
...
HI LO Waveform
comparison
judgment
... Hold judgment
or
HOK
HH HL
10