Writing The Effective Area Of The Sampled Waveform - Unipulse f395 Operation Manual

18.Interface

18-4-6. Writing the Effective Area of the Sampled Waveform

End of the area
Start of the area
143
Ｗ ５ ４ Ｓ Ｐ
Host
Return
Ｗ ５ ４ Ｓ Ｐ
F395
Ｗ ５ ５ Ｓ Ｐ
Host
Return
Ｗ ５ ５ Ｓ Ｐ
F395
・ In the Multi-Hold mode and Hysteresis mode, the operation is
executable only when the set value of W51 is 0 ~ 15 or 92.
・ In the Waveform Comparison mode and Waveform and Displacement
Comparison mode, the operation is executable only when the set
value of W51 is 0 ~ 15, 91 or 92.
Effective waveform area
The F395 divides the sampled waveform into 2048 divisions. For the
size of the effective area, set the start and end of the area.
0 ・ ・
100
Example) Making the area between point
above graph
Ｗ ５ ４ Ｓ Ｐ ２ ０ ４ ０
Ｗ ５ ５ Ｓ Ｐ ０ １ ０ ０
This is the same as in "14-4-3. Area Setting" P90 in key setting.
4-digit decimal number
Set the size of the effective
waveform area. (0000 ~ 2047)
Sent (written value)
4-digit decimal number
Set the size of the effective
waveform area. (0000 ~ 2047)
Sent (written value)
B
A
・ ・ ・ 2047
2040
A
and
Terminator
Terminator
Terminator
Terminator
Terminator
Terminator
B
effective on the