Unipulse f395 Operation Manual page 162

2. All reading: Rejected waveform
R H N
Host
＊
F395 R H N 1 :
2 :
3 :
9 :
3. Point-by-point reading: Latest sampled waveform
R H G
Host
＊
F395 R H G 1 :
If there is no hold data, "-----" is totally displayed except for 1: / 2: / - 9:
and SUM.
Differences between go and return measured values are read out
to the data of X-axis at the hold points in Hysteresis 2 mode.
Also, the result of judging of the differences between go and return
measured values are read out in SX.
Terminator
* Entry of a numerical value from 1 to 4 into * allows
reading of the hold data of the *th rejected waveform.
1: Last rejected waveform ~ 4: 4th last rejected waveform
Hold type Y-axis data
× × ± ０ ０ ０ . ０ ± ０ ０ ０ ０ . ０
× × ± ０ ０ ０ . ０ ± ０ ０ ０ ０ . ０
× × ± ０ ０ ０ . ０ ± ０ ０ ０ ０ . ０
× × ± ０ ０ ０ . ０ ± ０ ０ ０ ０ . ０
SUM 1 ~ 4 Terminator
Terminator
* Entry of a numerical value from 1 to 9 into * allows
reading of the *th hold data.
Hold type Y-axis data
× × ± ０ ０ ０ . ０ ± ０ ０ ０ ０ . ０
18.Interface
X-axis data Status
SY SX
SY SX
SY SX
SY SX
X-axis data Status
SY SX
Terminator
148