Unit Setting Method - Unipulse f395 Operation Manual

3. The basic setting screen in code setting appears. Select "Basic".
Code Setting
4. The judgment setting screen appears. Press
("DPM Hold HI" in this case).

3-3-2. Unit Setting Method

In this manual, the method of setting an item with multiple selections is described as
follows:
Example: Setting a "unit"
MODE
This operation can be performed by the following procedures.
1. Press
Main
Page 1
CH1
CAL. → PAGE
→
CH2
on the main screen.
3.Screen Configuration and Setting Methods
and select the setting item
Page 2
→ Unit
18