Control Signal Display - Unipulse f395 Operation Manual

15.Waveform Reading

15-8. Control Signal Display

The input conditions of the H/M and T/H signals are displayed together with the graph
on the screen.
In modes other than the Hysteresis / Hysteresis 2 mode
In the Hysteresis / Hysteresis 2 mode
(The colors and up-and-down relationship between the H/M and
T/H signals are the same as the above.)
Display is provided when the Control Signal Display setting is "ON".
99
Setting item: ON / OFF
MODE Read Wave
→
Control Signal
→
T/H (pink)
H/M (green)
Go
Return