Contrast; All Parameters Clear; Self-Test - Unipulse f395 Operation Manual

17-4. Contrast

Set the contrast of the color liquid crystal display.
Setting item: UP / DOWN
Up: .................... The LDC becomes brighter in stages.
Down: ................ The LDC becomes darker in stages.

17-5. All Parameters Clear

All set values (SRAM items only) are reset to their initial values.
For the initial values, see "24. Setting Items list" P161.
The operation is executed by pressing the
The operation can be executed only when the "Set Value Protection" setting is "All
Unprotect".

17-6. Self-test

The operating conditions of the F395 body are tested by this function.
If there is any problem, ask your dealer for repair.
The operation is executed by pressing the
・ If the backlight ON signal is kept on, the backlight will not go out.
・ When "0" is set, if the screen is not touched and sampling is not
executed for 2 hours, the backlight will go out. (The backlight is lit by
touching the touch panel, executing sampling, or turning on the
backlight ON signal.)
MODE → System
MODE System2
→
MODE System2
→
17.System-related Settings and Operations
→ Contrast
All Param. CLR
→
Self Test
→
key.
key.
128