Setting Methods; Specification Of Setting Items - Unipulse f395 Operation Manual

3.Screen Configuration and Setting Methods

3-3. Setting Methods

3-3-1. Specification of Setting Items

In this manual, the method of specifying a setting item is described as follows:
Example:
Specifying the "Displacement Hold High Limit" in the "Hysteresis" mode:
This operation can be performed by the following procedures.
1. Press
2. The mode setting screen appears. Select "Code Set".
17
MODE → Code Set → Judgment: PAGE → DPM Hold HI
on the main screen.
Main
Mode Setting