Unipulse f395 Operation Manual page 42

：1) When the Multi-Hold / Hysteresis mode is used.
・HH/LL
2) When the Waveform Comparison / Waveform and
・LO displacement 1,： 1) When the Hysteresis / Hysteresis 2 / Waveform and
OK displacement 1, Displacement Comparison mode is used.
HI displacement 1 Outputs the results of judgment of the displacement with
2) When the Multi-Hold / Waveform Comparison mode is used.
・LO2, OK2, HI2 ： 1) When the Multi-Hold / Hysteresis mode is used.
2) When the Hysteresis 2 mode is used.
3) When the Waveform Comparison / Waveform and
・LO displacement 2,： 1) When the Hysteresis mode is used.
OK displacement 2, Outputs the accumulated
HI displacement 2 LO displacement 1, OK displacement 1 and
2) When the Hysteresis 2 mode is used.
Outputs the results of judgment of the load with respect to the
hi-hi limit / lo-lo limit.
Displacement Comparison mode is used.
Not used. (The output remains OFF.)
respect to the displacement high limit / displacement low
limit / displacement hold high limit /displacement hold low
limit.
Not used. (OK displacement 1 turns ON.)
*1
Outputs the accumulated
and HI1 on the previous operation channel at switch-time.
Returns to OK2 when the START signal is turned ON.
*1
Outputs the accumulated
and HI1 with the timing of inputting HOLD1, HOLD2 and
HOLD3.
*1
Outputs the accumulated
and HI1 with the timing of judging the difference between go
and return.
Returns to OK2 when the START signal is turned ON.
Displacement Comparison mode is used.
Outputs the results of judgment of the load with respect to the
hi-hi limit / lo-lo limit.
*1
HI displacement 1 on the previous operation channel at
switch-time.
Returns to OK displacement 2 when the START signal is
turned ON.
Outputs the accumulated
displacement 1, OK displacement 1 and HI displacement 1
with the timing of inputting HOLD1, HOLD2 and HOLD3.
Returns to OK2 when the START signal is turned ON.
4.Methods of Connection
results of judgment of LO1, OK1
results of judgment of LO1, OK1
results of judgment of LO1, OK1
results of judgment of
*1
results of judgment of LO
28