Unipulse f395 Operation Manual page 22

[Setting screen]
Setting mode name
Setting
item name
1. Y-axis display section
・Measured value .....Displays Y-axis measured values such as pressure, and also
・Unit ....................... Displays the unit set with the analog CH set on the Y-axis.
2. High and low limit set values
・ Displays the High Limit / Low Limit of the ch (operation ch) set by external input in the
Multi-Hold / Hysteresis mode.
・ Displays the HI-HI Limit / LO-LO Limit of the ch (operation ch) set by external input
in the Waveform Comparison / Waveform and Displacement Comparison mode.
(See "16-2-7. High Limit / Low Limit / HI-HI/LO-LO Mode / HI-HI Limit / LO-LO
Limit" P109.)
Setting item
selection key
1) Shifts pages when setting items at the same level
cannot be displayed on one page.
2) Moves to another item at the same level on the item
setting screen with the
displays error messages when measurement errors occur.
(See "7-4. X/Y-axis Setting by Operation Mode and Input CH" P41,
and "19. Error Messages" P150.)
Status
Normal
In sampling
Hold
(See "5-7. Unit" P35, and "16-2-3. Select Analog CH" P104.)
2.Name and Function of Each Part
Returns to the
previous screen level.
key displayed in his place.
Display color
Blue
White
Green
Returns to
the main screen.
8