Area Setting - Unipulse f395 Operation Manual

3. By pressing the graph area, the waveform is shifted to the pressed location. Also, by
changing the increment/decrement value displayed at the simple numerical input
section, the waveform can be shifted while specifying the amount of increment/
decrement. After completion of shifting, press the
4. Display the shifted waveform.

14-4-3. Area Setting

Set the start point/end point of the comparison area to decide the part of the waveform
targeted for comparison.
1. Area register key - - - - - - - - - Registers the area.
14.Waveform Editing
key.
①
90