Unipulse f395 Operation Manual page 80

In the Hysteresis 2 mode, the main screen is displayed as follows:
・ High/Low Limit Waveforms are not displayed on the graph, and if the result of
comparison is an error, the result of measurement is displayed in red.
・ The results of measurement are displayed from the left in the order of pulse input.
・ When no pulse is input, the result of measurement is displayed as "-----".
In the hysteresis 2 mode, hold point display screen is as follows.
12.Hysteresis 2
Differences between
go and return measured
values are displayed.
66