Unipulse f395 Operation Manual page 33

3.Screen Configuration and Setting Methods
2. The mode setting screen appears. Select "CH1 CAL.".
3. The CH1 CAL. screen appears. Press
4. The unit setting screen appears.
19
Mode Set
Select a desired item by pressing the
Check that the desired description is displayed at the top, and press OK for entry.
Channel number selection in code setting is an item to select
internal channel number(s), and is not to change operation ch.
Operation ch is changed by external input.
(See "4-3. Control Connector Connection" P25.)
, and select "Unit".
and keys.