8．Hold Point Display Screen - Unipulse f395 Operation Manual

8. Hold Point Display Screen
Up to 9 results of measurement can be confirmed on the hold point display screen. Since
the display is always updated every time a measurement is made in order to display the
latest results of measurement, use the display by switching from the graph screen
according to the measuring conditions.
1 .......... If any result is an error, the whole column becomes red.
2 .......... If there is no result, "----" is displayed
3 .......... The results of comparison are displayed. (H, L, HH, or LL is displayed. Blank
Press the
［Graph Screen］
when OK.)
Since the display is always updated, read specific results of
measurement in detail from the Waveform Reading screen. (See "15-1.
Waveform Reading" P92.) (The Waveform Reading screen is not
updated to the latest results of measurement.)
8.Hold Point Display Screen
key.
1 2
［Hold Point Display Screen］
3
42