Each Setting Item; Channel Number Selection - Unipulse f395 Operation Manual

16.Code Setting

16-2. Each Setting Item

16-2-1. Channel Number Selection

Set channel number(s) in Code Setting. Up to 32 channels can be set in Code Setting,
which can be switched and controlled as desired externally.
Example: Setting the operation ch to 5ch
1. Press
2. Determine by pressing
32 channels from 0ch to 31ch can be set.
For setting the same value to 32 channels at the same time, set at 32ch. The same set
value is entered for all 0ch to 31ch every time each item of Code Setting is set.
103
Setting range: 0 ~ 32
MODE Code Set
→
five times.
.