Example 2
+
Waveform
start level
OFF
START
ON
Status display
* If a HI or LO alarm is given at the same time when waveform capturing ends,
the waveform is registered in the rejected waveform area.
Example 3
+
Waveform
Trigger
start level
A
OFF
START
ON
OFF
STOP
ON
* The level edge is cleared when the STOP signal is turned on with the START signal
ON. Therefore, waveform capturing will not start until the level edge at "B" is
established. (Waveform capturing starts at "A" if the STOP signal is not turned on.)
9.Method of Starting Measurement
Start of waveform capturing
WAIT 2
SAMPLE
Start of waveform capturing
B
t
t
44