14-4-3-1.Area Setting Procedures; Waveform Save - Unipulse f395 Operation Manual

14.Waveform Editing
14-4-3-1. Area Setting Procedures
1. Move the cursors to sandwich the area.
2. Press the
3. The set area is indicated by a blue line at the top of the screen, and outside the area

14-4-4. Waveform Save

Waveforms edited under "Waveform Editing" are stored by this operation. Waveforms
saved here are used for pass / fail judgment. Up to 16 paird (ch) of waveforms can be set,
and waveforms to be used are set by external operation ch selection signals.
91
key to register the area.
becomes gray.
Setting range: 0 ~ 15