Destination Ipv6; Destination Port - HP FlexFabric 12500 Series Network Management And Monitoring Command Reference

Routing
Hide thumbs Also See for FlexFabric 12500 Series:
Table of Contents

Advertisement

# In ICMP template view, configure the destination IP address for the ICMP echo operation as 10.1.1.1.
<Sysname> system-view
[Sysname] nqa template icmp icmptplt
[Sysname-nqatplt-icmp-icmptplt] destination ip 10.1.1.1

destination ipv6

Use destination ipv6 to configure the destination IPv6 address for the operation.
Use undo destination ipv6 to remove the destination IPv6 address.
Syntax
destination ipv6 ipv6-address
undo destination ipv6
Default
No destination IPv6 address is configured for the operation.
Views
DNS template view, ICMP template view, TCP template view
Predefined user roles
network-admin
mdc-admin
Parameters
ipv6-address: Specifies the destination IPv6 address for the operation. IPv6 link-local addresses are not
supported.
Examples
# In ICMP template view, configure the destination IPv6 address for the operation as 1::1.
<Sysname> system-view
[Sysname] nqa template icmp icmptplt
[Sysname-nqatplt-icmp-icmptplt] destination ipv6 1::1

destination port

Use destination port to configure the destination port number for the operation.
Use undo destination port to remove the destination port number.
Syntax
destination port port-number
undo destination port
Default
No destination port number is configured for the operation.
Views
TCP operation view, UDP echo operation view, UDP jitter operation view, voice operation view, DNS
template view, TCP template view
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Flexfabric 12500e series

Table of Contents