Step
2.
Enter AUX line view or class
view.
3.
Disable authentication.
4.
Assign a user role.
The next time you log in through the console port, you do not need to provide a username or password.
Configuring password authentication for console login
Step
1.
Enter system view.
2.
Enter AUX line view or
class view.
3.
Enable password
authentication.
Command
•
Enter AUX line view:
line aux first-number
[ last-number ]
•
Enter AUX line class view:
line class aux
authentication-mode none
user-role role-name
Command
system-view
•
Enter AUX line view:
line aux first-number
[ last-number ]
•
Enter AUX line class view:
line class aux
authentication-mode password
50
Remarks
A setting in user line view is
applied only to the user line. A
setting in user line class view is
applied to all user lines of the class.
A non-default setting in either view
takes precedence over a default
setting in the other view. A
non-default setting in user line view
takes precedence over a
non-default setting in user line class
view.
A setting in user line class view
takes effect only for users who log
in after the configuration is
completed. It does not affect online
users.
By default, authentication is
disabled for the AUX line.
The default user role is
network-admin for an AUX line
user of the default MDC.
Non-default MDCs do not support
console login.
Remarks
N/A
A setting in user line view is applied
only to the user line. A setting in user
line class view is applied to all user
lines of the class.
A non-default setting in either view
takes precedence over a default
setting in the other view. A
non-default setting in user line view
takes precedence over a non-default
setting in user line class view.
A setting in user line class view takes
effect only for users who log in after
the configuration is completed. It
does not affect online users.
By default, authentication is disabled
for the AUX line.
By default, authentication is disabled
for the AUX line.