User-Name-Format (Radius Scheme View) - HP 6125G Command Reference Manual

Parameters
seconds: RADIUS server response timeout period in seconds, in the range of 1 to 10.
Description
Use timer response-timeout to set the RADIUS server response timeout timer.
Use undo timer response-timeout to restore the default.
By default, the RADIUS server response timeout period is 3 seconds.
If a NAS receives no response from the RADIUS server in a period of time after sending a RADIUS request
(authentication/authorization or accounting request), it resends the request so that the user has more
opportunity to obtain the RADIUS service. The NAS uses the RADIUS server response timeout timer to
control the transmission interval.
The maximum number of RADIUS packet transmission attempts multiplied by the RADIUS server response
timeout period cannot be greater than 75.
Related commands: retry.
Examples
# Set the RADIUS server response timeout timer to 5 seconds for RADIUS scheme radius1.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] timer response-timeout 5

user-name-format (RADIUS scheme view)

Syntax
user-name-format { keep-original | with-domain | without-domain }
View
RADIUS scheme view
Default level
2: System level
Parameters
keep-original: Sends the username to the RADIUS server as it is input.
with-domain: Includes the ISP domain name in the username sent to the RADIUS server.
without-domain: Excludes the ISP domain name from the username sent to the RADIUS server.
Description
Use user-name-format to specify the format of the username to be sent to a RADIUS server.
By default, the ISP domain name is included in the username.
A username is generally in the format userid@isp-name, of which isp-name is used by the switch to
determine the ISP domain to which a user belongs. Some earlier RADIUS servers, however, cannot
recognize a username including an ISP domain name. Before sending a username including a domain
name to such a RADIUS server, the switch must remove the domain name. This command allows you to
specify whether to include a domain name in a username to be sent to a RADIUS server.
68