Switching The Input Reference Signal For Hd System; Setting Conversion Formats - Sony MVS-8000X User Manual

The AUX Signal Format menu appears.
3
In the list, select the relevant data by any of the
following methods.
• Press directly on the list.
• Press the arrow keys to scroll the reverse video
cursor.
• Turn the knob.
Knob Parameter Adjustment
1 Output No Number to be
selected
For each group, four outputs are selected together.
4
In the <AUX Signal Format> group, select
[59.94Hz(2x)] from the following.
[59.94Hz]: Mode not allowing a 59.94(2x) signal on
the AUX bus.
[59.94Hz(2x)]: Mode allowing a 59.94(2x) signal on
the AUX bus.
5
Press [Execute].
A confirmation message appears.
6
To change the mode, select [Yes].
This changes operation to the selected mode.
Even if you press [Execute], the memory is not
reinitialized, and therefore frame memory images and
other data is not lost.
Notes
• When 3D mode is enabled, 59.94(2x) format setting is
invalid.
• It is not possible to select a 59.94(2x) format signal as
output to a small window in the multi viewer.
• If you assign 59.94(2x) to any of the following outputs,
they will not work as a format converter output any
longer.
Output 1, Output 2, Output 25, Output 26
Switching the Input Reference
Signal for HD System
Notes
The input reference signal for the MKS-7470X/7471X is
used in common with the switchers.
This changes the input reference signal.
• Tri Sync: tri-level sync for an HD system
• BB (Black Burst): black burst or sync
The following table shows the relation between signal
format and the frequency of a signal that can be used as the
input reference signal.
Signal format
1080PsF/29.97
1080P/59.94,
1080i/59.94
Setting values
1080PsF/25
1 to 48
1080P/50,
1080i/50
1080PsF/24
1080PsF/
23.976
720P/59.94
720P/50
a) Interlock mode

Setting Conversion Formats

Installing the MKS-8450X Format Converter Board in the
MVS-8000X/7000X enables signal video format
conversions.
This operation is valid only when BB is selected in the
<Ref Input Format> group.
In the MVS-7000X, format conversion is assigned to
primary inputs in advance.
For details about the primary input assignment, see
"Selecting the Primary Input to be Used in the Format
Converter" (page 209).
Format converter
Installing the Format Converter Board in the switcher
enables the following signal video format conversions.
• Up-conversion: from SD (4:3) to HD (16:9)
Input reference signal
Tri Sync Black burst
59.94 Black Burst Sync 59.94
59.94
50 Black Burst Sync 50
50
48 –
47.952 Black Burst Sync
a)
59.94 59.94
59.94 Black Burst Sync 59.94
59.94
– Black Burst Sync 50
50
Setting the Signal Format (Format Menu)
a)
145