Metal Settings - Sony MVS-8000SF User Manual

• To select the signal to mix with the relief pattern for Relief
In the <Chroma Type> group, select the signal to mix with the relief
pattern.
Matte: Select a single color. The following parameters can be adjusted.
Knob
2
3
Video: Select the input video signal.
6
To invert white and black in the extracted video, or to invert the outlines
and the sections other than the outlines, press [Nega], turning it on.
Masking the Sketch effect with a selected pattern
Press [Mask] to display the Mask menu and set the type of pattern and
modifiers.
For details, see "Mask Settings" (page 577).
Notes
The Mask function is not supported on the MVE-8000.

Metal Settings

Notes
The Metal function is not supported on the MVE-8000.
Applying the Metal effect
1
In the DME menu, select VF7 'Enhanced Video Modify' and HF2 'Metal.'
The Metal menu appears.
2
Press [Metal], turning it on.
This enables the Metal effect.
3
Set the parameters.
Knob
1
Parameter Adjustment
Saturation Saturation
Hue Hue
Parameter Adjustment
Mix Ratio Mix amount for Metal video and
input video
Setting values
0.00 to 100.00
359.99 to 0.00
Setting values
0.00 to 100.00
DME Special Effect Operations
573