Table of Contents
Advertisement
Check the setting information and
6
click "完了" (Finish)
The contents of the settings are listed. Make sure
that all settings are correct.
Checking " デスクトップにダイヤルアップの
ショートカットを作成する " (Add dial-up
shortcut on desktop) automatically creates a
shortcut icon.
To change any setting, click " 戻る " (Back).
Click "OK"
7
Execute communication. → p.24
Easy settings: "Settings for 64K data communication
using other providers"
Click "かんたん設定" (Easy settings)
1
Select "64Kデータ通信" (64K data communication) and click "次へ" (Next)
2
Select "その他" (Other) and click "次へ" (Next)
3
Enter the dial-up information and
4
click "次へ" (Next)
Register the following items in order to connect
to a service provider with ISDN synchronous 64K
access points other than mopera U or mopera
when creating a dial-up;
• " 接続名 " (Connection name) (optional)
• " モデムの選択 " (Modem Selection)
(FOMA SO706i)
• " 電話番号 " (Phone number)
• Notifying or not notifying the caller ID for dial-up
connection
You cannot use the following reserved
characters: ¥/: ＊ ?!<> │"(half-pitch only).
Enter the correct information according to the
provider information. Enter the correct, case-
sensitive phone number in half-pitch.
For the caller ID settings, follow the instructions
from the provider.
To specify advanced settings (TCP/IP settings)
Clicking " 詳細情報の設定 " (Detailed settings) displays the setup screen for "IP address" and
"Name server". If they must be input as the provider or corporate LAN information, follow the input
information directions and enter the addresses.
23
Advertisement
Chapters
Table of Contents
