Click "OK"
12
You need to restart the PC to enable the optimized settings. If the restart selection screen appears, click
" はい " (Yes).
Execute communication. → p.24
Easy settings: "Settings for 64K data communication
using mopera U or mopera"
d This section explains how to specify settings for 64K data communication at the maximum speed of
64kbps. The DOCOMO Internet connection service "mopera U" or "mopera" will be used as a
provider.
d 64K data communication is charged according to the length of time you connected.
d Note that the communication charge can become expensive if "64K data communication" is used for
a long time.
Click "かんたん設定" (Easy settings)
1
Select "64Kデータ通信" (64K data communication) and click "次へ" (Next)
2
Select "『mopera U』への接続" ('mopera U' access) or "『mopera』への接
3
続" ('mopera' access) and click "次へ" (Next)
When you select "『mopera U』への接続 " ('mopera U' access), subscription confirmation message
appears. Click " はい " (Yes) when you have already subscribed to mopera U.
See p.23 if you use a provider other than mopera U or mopera.
Enter the access point name and
4
select the modem, and click "次へ"
(Next)
The "64K データ通信設定 " (64K data
communication setting) screen appears. You can
specify the name of the connection. Enter a
name easy to recognize in the " 接続名 "
(Connection name) column.
You cannot use the following reserved
characters: ¥/: * ?!<> │"(half-pitch only).
When using the FOMA USB Cable with Charge
Function 01/02 (optional), confirm that modem
name is set to "FOMA SO706i".
Select "設定しない " (OFF) or "186 を付加する "
(Add 186) for the caller ID settings.
Specify a user ID and password,
5
select the accessible user and click
"次へ" (Next)
You can leave user ID and password blank for
the mopera U or mopera connection.
When "すべてのユーザー" (All users) is selected
in the " 使用可能ユーザーの選択 " (Selecting
accessible user) column, the connection setting
is applied to all the users registered in Windows.
For Windows Vista
Specify the user ID and password and click
" 次へ " (Next)
22