Data Communication - NTT docomo FOMA SO706i Instruction Manual

Data Communication

Data Communication Available for the FOMA Terminal
Available data communication between the FOMA terminal and PCs is classified in 3
categories: data exchange (OBEX
communication.
Data exchange (OBEX
The data such as images, music files, phonebook entries, mails, and more can be exchanged with equipment
such as other FOMA terminals and PCs.
PC
Packet communication
Packet communication is charged according to the amount of data sent and received, and the data is received
at the maximum speed of 3.6Mbps and sent at the maximum speed of 384kbps (The communication speed is
384kbps at maximum for both sending and receiving outside FOMA HIGH-SPEED area.). This is suitable for
exchanging small amount of data at high speed.
a When you use packet communication with DOCOMO PDA "sigmarion Ⅲ " or "musea", the communication
speed is 384kbps at maximum for both sending and receiving. It is not compatible with FOMA HIGH-SPEED
Area communication.
You can also access a corporate LAN connected to the FOMA network.
Use an access point that supports FOMA packet communication, such as DOCOMO Internet connection
service "mopera U" or "mopera" (When you use access points for "mopera", the communication speed is
384kbps at maximum for both sending and receiving.).
Packet communication is performed via the FOMA USB Cable with Charge Function 01/02 (optional) to a PC or
via a dedicated cable connection to a PDA.
*Note that the communication charge can become very expensive when large files are sent and received.
TM
communication), packet communication and 64K data
TM
communication)
SO706i
Infrared data exchange
iC exchange
FOMA USB Cable with
Charge Function 01/02
PC
FOMA USB Cable with Charge Function 01/02
1
SO706i
microSD card
DOCOMO keitai datalink