Setting I-Channel; I-Channel Setting - NTT docomo FOMA SO706i Instruction Manual

Table of Contents

Advertisement

N
When information is received, the ring tone will not
sound, and the vibrator does not vibrate. Also, the
illumination does not flash.
Channel list screen (p.153)
→ p.94
Add shortcut
Replay......Displays the channel list screen from the
beginning.
Sound
effect......Sets whether to play the sound effect of
the channel list screen or not (ON/OFF).
Window
Open new
window......"Using multi window"
→ p.140
Close
window......Closes the displayed i-Channel
window.
Change
window......Switches windows when
multiple websites are open.
N
The setting of "Sound effect" set on the channel list
screen is applied to "Sound effect" of "i-mode
settings".

Setting i-Channel

You can set whether i-Channel information is
displayed on the standby screen as a ticker or not.
You can also set the scroll speed, color/front size of
the ticker on the standby screen.
When set to "ON", ticker always appears on the
standby screen. When set to "Receiving", ticker
appears twice on the standby screen when news is
received.
o "i-Channel" Select any item:
1
i-Channel
list......Displays the channel list.

i-Channel setting

Ticker display setting
whether the ticker of channel information is
displayed on the standby screen (ON/
Receiving/OFF).
Ticker speed setting
Selects the scrolling speed of the ticker from
"Normal/High/Low".
Ticker color setting
color ("White"/"Yellow"/"Blue"/"Red"/"Green").
* : Move the highlight to display the ticker color.
154
<i-Channel setting>
(default: ON)......Sets
(default: Normal)......
*
......Selects the ticker
Ticker size setting
Selects the ticker font size from "Small/
Standard/Large". → p.93
Reset
i-Channel......Resets the i-Channel settings
to the default settings.
N
The i-Channel setting cannot be changed in Public
mode (Driving mode), at the time of purchase (Reset
i-Channel) or if the FOMA card (UIM) is not inserted,
etc.
<Ticker display setting>
The ticker display setting remains when you
unsubscribe from i-Channel or when you unsubscribe
from i-mode service before unsubscribing from
i-Channel, but tickers will not be displayed
automatically.
Settings are retained for each mode of 2in1.
<Reset i-Channel>
i-Channel tickers are not displayed just after resetting
i-Channel. The ticker is turned on again automatically
when the information is updated automatically or
when p is pressed to receive the latest information.
(default: Standard)......

Advertisement

Table of Contents
loading

Table of Contents