NTT docomo FOMA SO706i Instruction Manual page 315

N
To change the Voice mail service setting for
videophone calls, make a voice call to "1412".
DTMF is not available if connected to Voice Mail with
Chara-den. Select "Send DTMF tone" from the
function menu to activate Send DTMF tone mode.
→ p.50
<Check setting>
When checking Number B setting for 2in1, only the
active or inactive information appears.
<Check messages>
If you have the recorded messages stored at the Voice
mail service center, the "
" " ("Voice mail" shortcut icon) appear on the
standby screen for the recorded messages of voice
calls. The recorded messages of videophone calls are
notified by SMS.
The number in the voice mail icon changes according
to the number of stored messages "
... " " (10 messages or more).
The displayed number of Voice mail messages is the
number of new messages announced by the Voice
mail center. The number of stored messages is not
included.
You may not be able to use this function to check for
the message recorded after checking the message.
<Message notification>
When 2in1 is set to A mode or B mode, the notification
tone does not sound when a message is recorded for
the unused number.
<Erase icon>
Clearing the icon does not delete the corresponding
recorded messages. The voice mail icon appears
again when you check for messages.
<Activate notice call>
Even if you set the SMS Rejection setting, the FOMA
terminal receives the notification.
Voice Mail setting screen
(p.312)
Activate・Deactivate......Activates or deactivates the
Voice mail service.
Set ring time......Changes the ring time.
" (voice mail icon) and
", " ", " "
Call Waiting
When you receive a call while talking on a call, this
service notifies the call with a ring tone and you can
answer the newly received call by putting the current
call on hold. You can also put your current call on hold
and make a new call to someone else.
To use Call waiting, select "Answer" in "Incoming
Call Mng" (p.317) beforehand. If another setting is
selected, you will not be able to answer a voice call
received during another voice call even when Call
waiting is activated.
You can answer another call when you receive a
videophone call during a voice call or when you
receive a voice call or videophone call during a
videophone call if you activate Call waiting and set
"Incoming Call Mng" to "Answer". In this case, you
have to end the current voice call or videophone
call (You cannot put the current call on hold).
→ p.317
Using the Call Waiting
i "SERVICE" "Call Waiting"
1
Select any item:
Activate・Deactivate......Activates or deactivates
the Call waiting service.
Check setting......Checks the current Call waiting
service settings.
Putting the current voice call on hold
to answer a new received voice call
1 When you hear the double tones
(repeated soft double-beeps) during a
voice call, press r
Your first call is automatically put on hold and the
FOMA terminal answers the new voice call.
Switch back to the first call
2
■ To end the call with the second caller
y r
This ends the call with the second caller and
returns you to your first call.
■ To put the second caller on hold
r
This puts the second caller on hold and returns
you to your first call.
You can switch back and forth between the 2
calls by pressing r.
Continued on next page
<Call Waiting>
313