NTT docomo FOMA SO706i Instruction Manual page 384

N
The reservation time for the software update will be based on the server's time.
When the reservation time for the software update is the same as the alarm notification time, priority is assigned to
the software update.
When the reservation time comes while the other function is used, updating starts after finishing the function.
If you perform "Initialize" after the reservation procedure is complete, the software update does not start at the
scheduled time. Reschedule the time for update.
● If you select "Others"
You can select the desired date and period of time after communicating with the server if you select
"Others" at step 1 in p.381.
Select a desired date
1
Ｓｏｆｔｗａｒｅ Uｐｄａｔｅ
Ｓｅｌｅｃｔ ｐｒｅｆｅｒｒｅｄ ｄａｙ
［２００８／ ８／１７（Ｓｕｎ）］
Ｓ Ｍ Ｔ Ｗ Ｔ Ｆ Ｓ
１ ２
３ ４ ５ ６ ７ ８ ９
１０ １１ １２ １３ １４ １５ １６
１７ １８ １９ ２０ ２１ ２２ ２３
２５ ２６ ２７ ３０
２４ ２８ ２９
３１
Ａｖａｉｌａｂｌｅ
Select an hour
2
Ｓｏｆｔｗａｒｅ Uｐｄａｔｅ
１／３
Ｓｅｌｅｃｔ ｙｏｕｒ ｐｒｅｆｅｒｒｅｄ
ｔｉｍｅ−ｓｌｏｔ
０：００ − ０：５９ ○
１：００ − １：５９ △
２：００ − ２：５９ ○
３：００ − ３：５９ ○
４：００ − ４：５９ △
５：００ − ５：５９ △
６：００ − ６：５９ ×
７：００ − ７：５９ △
Confirm the software update date and time
3
Ｓｏｆｔｗａｒｅ Uｐｄａｔｅ
Ｒｅｓｅｒｖｅ ｆｏｒ
８／１７（Ｓｕｎ） ０：２３？
ＹＥＳ
ＮＯ
● Checking/Changing/Canceling the reservation date and time
<Example: To cancel the reservation after checking it>
i "SETTINGS" "Other settings" "Software Update" Enter your security
1
code "Update"
"Cancel"
2
Ｓｏｆｔｗａｒｅ Uｐｄａｔｅ
Ａｌｒｅａｄｙ ｒｅｓｅｒｖｅｄ ｆｏｒ
８／２３（Ｓａｔ） ７：３０
ＯＫ
Ｃｈａｎｇｅ
Ｃａｎｃｅｌ
382
In the date selection display, you will see the update availability represented as
shown below:
○
: Available
△
: Almost full
None : Full
In the time selection display, you will see the update availability represented as
shown below:
○ : Available
△ : Almost full
× : Full
Select the period of time to display the candidates for the reservation time by
communicating with the server again.
If you check the selected date and time and select "YES", you will communicate
with the server again.
The software update is reserved.
■ To accept the reservation date and time
"OK"
■ To change the reservation date and time
"Change"
Once information specific to your FOMA terminal has been sent to the server,
follow the procedure used when "Others" is selected. → p.382