Functions - NTT docomo FOMA SO706i Instruction Manual

N
The volume of the ring tone is set to the same volume
set at "Mail" of "Ring volume".
The description screen or "Receive Area Mail" screen
may not appear when you receive the Area Mail
during using functions such as an i-αppli or the
camera. If an earthquake early warning is received,
the vibrator always works regardless of the manner
mode setting.
Setting Early Warning "Area
Mail"
Make the settings for receiving Area Mail.
Mail Setting screen (p.178) "Area Mail
1
setting"
"Area Mail setting" screen
appears.
Select any item:
2
Receive setting (default: No)......Sets whether to
receive the Area Mail.
• The confirmation message asking whether to use
Area Mail appears before setting, read the given
notes carefully and select "YES"/"NO".
Beep setting
Beep setting (default: ON)......Turns the beep
ON/OFF.
Beep time (default: 10 seconds)......Sets the
beep time between 01 and 30 seconds.
Receive entry......Registers "Area Mail name" (any
name) and "Message ID" (provided by the service
provider) of information you want to receive except
early warning. Select "<Not recorded>" at the
"Receive entry" screen, and enter "Area Mail name"
and "Message ID" after you enter your security code.
The urgent news flash is sent regardless of the
settings of Receive entry.
182
<Area Mail setting>
Area Mail setting
Composing and Sending SMS
Your SMS address is your "subscriber mobile
phone number".
This service allows you to exchange text messages
with subscribers to overseas carriers other than
DOCOMO. For information on the supported
country and the supported overseas carriers, refer
to the DOCOMO website.
u "Compose SMS"
1
The "New SMS" screen
appears.
" <No address>" Enter an
2
address
Select the mail address input
method to enter the address.
Sets the e-mail address by
browsing the phonebook,
received address list or
entering text directly → p.156
■ If the recipient is using
an overseas carrier other than DOCOMO
Enter + (0 (1 second or longer)), the
country code, the other party's mobile phone
number
If the mobile phone number begins with zero (0),
omit the zero.
You can also send SMS by entering "010", the
country code, the other party's mobile phone
number in this order. (To reply to received SMS
from overseas, enter "010".)
3 " " Enter the message body
The numbers and types of characters that can
be entered are as specified in the "SMS input
character" settings. When set to "Japanese", you
can enter up to 70 characters regardless of
double-byte or single-byte. When set to
"English", you can enter up to 160 single-byte
alphanumeric characters and symbols.
Spaces are also counted in the same way as
characters.
o (Send)
4
An animation is displayed while the SMS is
being sent.
Editing sent and unsent SMS → pp.175, 176
<Compose SMS/Send>
New SMS
Function menu p.183