Before Use; Setting Channels - NTT docomo FOMA SO706i Instruction Manual

Before use

● View procedure
Step 1 Set channels→ p.209
Register channels for the area and set a list.
Step 2 View 1Seg → p.210
■When a call, etc. arrives while watching or
recording
When one of the following arrives while watching or
recording, video and audio are interrupted and each
function activates (Recording is not interrupted).
Watching can be resumed after each function is
finished.
• Voice call
• Videophone call
• Alarm, Schedule, To Do, booked program (When
"Alarm setting" is set to "Alarm preferred")
N
1Seg programs cannot be viewed if FOMA card (UIM)
is not inserted, subscription to DOCOMO is canceled,
or FOMA service usage is stopped.
Even if subscribed FOMA card (UIM) is inserted, 1Seg
may not be activated, e.g. if 1Seg programs are
watched repeatedly out of FOMA range. In this case,
move into FOMA range and retry activation.
Do not activate in the following situations when
watching 1Seg programs for the first time:
• Out of FOMA range
• Self mode activating
Prolonged 1Seg watching while charging may shorten
battery life.
■ Important
The information stored in your mobile phone (still
images recorded with 1Seg, TV links, information
saved to the storage area for broadcasts, etc.)
cannot be transferred. We recommend that you take
precautions such as keeping a separate note of
important information.

Setting Channels

To use 1Seg, set channels and select a channel list
beforehand. Register a channel list for each area.
Selecting the channel list allows you to watch local
channels.
Up to 10 channel lists can be registered, each of
which can contain up to 50 broadcast stations.
Receivable channels vary depending on the area.
Registering channel lists
i "1SEG" "Channel setting"
1
"Select area"
■ To search for channels automatically and
register a channel list
"Auto channel setting" "YES" "YES" Enter
title
To interrupt search, press o (Cancel) or t
then select "YES".
Select area Select prefecture "YES"
2
N
"Select area" may not work properly depending on the
area. In this case, use "Auto channel setting".
Perform "Auto channel setting" in a digital terrestrial
TV service area with strong signals.
"Remote control No. duplicated" may appear in "Auto
channel setting". In this case, select area manually.
Changing channel lists
Select a channel list to set channels.
i "1SEG" "Channel list"
1
The "Channel list" screen
appears.
Continued on next page
<Channel setting>
Channel list
Function menu p.210
209