NTT docomo FOMA SO706i Instruction Manual page 441

Check "最適化を行う" (Optimize the setting) and click "次へ" (Next)
7
Optimize the communication settings of a PC to use FOMA packet communication. When "HIGH-
SPEED 対応端末の確認 (Confirmation for HIGH-SPEED phone)" screen appears, click " はい " (Yes).
→ p.27
If they are already optimized, the screen of Step 7 does not appear.
Check the setting information and
8
click "完了" (Finish)
The contents of the settings are listed. Make sure
that all settings are correct.
Checking " デスクトップにダイヤルアップの
ショートカットを作成する " (Add dial-up
shortcut on desktop) automatically creates a
shortcut icon.
To change any setting, click " 戻る " (Back).
Click "OK"
9
You need to restart the PC to enable the optimized settings. If the restart selection screen appears, click
" はい " (Yes).
Execute communication. → p.24
Easy settings: "Settings for Packet communication using
other providers"
Click "かんたん設定" (Easy settings)
1
Select " パケット通信（HIGH-SPEED 対応端末）" (Packet communication
2
(HIGH-SPEED phone)) and click "次へ" (Next)
For Windows Vista
Select " パケット通信 " (Packet communication) and click "次へ " (Next)
Select "その他" (Other) and click "次へ" (Next)
3
Click "OK"
4
The access point (APN) settings will be obtained from the FOMA terminal which is connected to the PC.
Wait for a while.
Specify the packet communication
5
settings
After the terminal setting is completely acquired,
the screen " パケット通信設定 " (Packet
communication setting) appears.
Enter any name in " 接続名" (Connection name).
You cannot use the following reserved
characters: ¥/: ＊ ?!<> │"(half-pitch only).
For the caller ID settings, follow the instructions
from the provider.
Select "設定しない" (OFF) for overseas use.
20