NTT docomo FOMA SO706i Instruction Manual page 434

Procedures ranging from installation of the FOMA PC
setting software to connection to the Internet
Install the "FOMA PC setting software"
Installing software
Make preparations for making various settings
Setting
preparation
Set according to the communication method you use
Various
settings
Connect to the Internet
Connecting
See p.14 for installation details.
When the "Previous FOMA PC setting software" is installed, you cannot install the
"FOMA PC setting software Ver4.0.0". Uninstall the "Previous FOMA PC setting
software" beforehand.
If a screen appears indicating that "Previous W-TCP setting software" or "Previous
APN setting software" is installed, see p.15.
Before making various settings, ensure that the FOMA terminal is connected to the
PC and has been properly recognized by the PC.
See p.7 for how to connect the FOMA terminal to the PC.
See "Setting the PC" (p.9) for how to make the PC recognize the FOMA terminal
properly.
If the FOMA terminal is not properly recognized by the PC, you cannot make various
settings nor perform communication.
Easy settings: "Settings for Packet communication using mopera U or mopera"
→ p.19
Easy settings: "Settings for Packet communication using other providers" → p.20
Easy settings: "Settings for 64K data communication using mopera U or mopera"
→ p.22
Easy settings: "Settings for 64K data communication using other providers" → p.23
For other settings, see p.27 or the following pages.
See p.24 for the executing communication.
13