Functions - NTT docomo FOMA SO706i Instruction Manual

Setting Different FOMA
Terminal Actions for Each
Phone Number and Mail
Address
You can set different ring tones or answer messages
for the Record message depending on groups, phone
numbers or e-mail address in the phonebook. This
function is useful when you want to distinguish the
caller only by the ring tone.
You cannot set this setting for "No Group" on the
FOMA terminal (Phone) or the phonebook or
groups on the FOMA card (UIM).
The Ring tone/Image functions are disabled when
the caller does not notify the caller ID. It is
recommended to set the "Caller ID Request"
service.
Phonebook detail screen (p.73)
1
u (FUNC) "Ring tone/Image"
The "Ring tone/Image"
screen appears.
" ★ " appears next to the
selected function.
The available functions vary
depending on the item
selected in the phonebook detail screen.
■ To set this function for each group
Group setting screen (p.72) u (FUNC)
"Ring tone/Image"
2 Select the item to distinguish
Select the item from "Voice call (recv.)/V.phone
(dial/recv.)/Mail (recv.)".
• When "Mail (recv.)" is selected, this function is
applied not only i-mode mail but SMS.
Select any item:
3
" ★ " appears next to the selected function.
■ To release a selected function
Highlight the function with " ★ " o (Reset)
The function is released and the "★" disappears.
*1
......Sets ring tones to distinguish the
Ring tone
caller of the phone or sender of mail.
"Changing the Ring Tone" → p.82
*1*2
......Sets images to distinguish the caller
Image
of the phone. "Changing the Display"→p.88
*3
......Selects Chara-den to be
Chara-den setup
displayed as the substitute image for videophone
calls.
<Ring tone/Image>
Ring tone/Image
*1
......Sets the illumination pattern
Set illumination
and color to distinguish the caller of the phone or
sender of mail.
"Setting the Flashing Mode of the Illumination"
→p.92
*1
Vibrator ......Sets vibration patterns to distinguish
the caller of the phone or sender of mail.
"Setting the Vibration to Notify You of Incoming
Calls" →p.84
*2
......Changes the answer
Answer message
message used when record message
message starts up depending on the caller.
"Having the Caller Leave a Message"→p.64
*1: You can also distinguish the incoming 64K data
communication.
*2: Available only when "Voice call (recv.)" or "V.phone
(dial/recv.)" is selected.
*3: Available only when "V.phone (dial/recv.)" is
selected.
*4: You need to set "Record message" to "ON"
beforehand.
■When you set Ring tone/Image
An icon appears in the phonebook detail screen
indicating that each item is set.
: Ring tone (voice/
videophone call)
: Ring tone (mail)
: Illumination (voice/
videophone call)
: Illumination (mail)
: Vibration (voice/
videophone call)
: Vibration (mail)
: Image (voice/videophone call)
: Answer message (voice/videophone call)
: Chara-den (videophone call)
N
You cannot set this setting for the phonebook stored
as the secret data. Even if the setting is made for the
group, it is disabled for the phonebook entry stored as
the secret data.
The "Mail (recv.)" setting set for a phone number is
activated when you receive an SMS or the sender's e-
mail address is "[phone-number]@ docomo.ne.jp".
Refer to the following pages for the priority when the
Ring tone/Image settings and other settings for
incoming calls, etc. are duplicated.
• Ring tone priority→p.83
• Vibrator priority → p.84
• Image priority → p.83
• Illumination priority → p.93
• Chara-den priority →p.71
*4
or quick
77