Auto Redial As Voice - NTT docomo FOMA SO706i Instruction Manual

Setting Functions for the
Videophone
i "SETTINGS" "Videophone"
1
The "Videophone settings"
screen appears.
Select any item:
2
Visual preference......Selects the image quality of
videophone calls from "Normal/Prefer img qual/
Prefer motion spd".
Select image→ p.67
Auto redial as voice......Sets whether to switch to a
voice call when a videophone call cannot be made
(ON/OFF).
Display setting
Main display......Selects the image displayed
on the main display from "Other side/My side".
→ p.67
Ntfy switch-mode
Hands-free switch......Sets whether to switch to
Handsfree automatically when starting a videophone
call (ON/OFF).
V-phone while packet→ p.67
Setting an image to send
You can set a JPEG image whose file size is 100K
bytes or less and not larger than 854 dots wide ×
854 dots high, or a GIF image whose file size is
100K bytes or less and not larger than 854 dots
wide × 480 dots high or 480 dots wide × 854 dots
high (except for the files with restrictions).
Videophone settings screen (p.67)
1
"Select image" Select any item:
On hold......Sets the image sent for a call on
answer hold.
Holding......Sets the image sent while holding a call.
Substitute image......Sets the image.
Record message......You can set the image sent
while recording videophone messages.
Preparing......You can set the image sent while
preparing for recording videophone messages.
2
Videophone settings
Setting for Switching between Voice
Call and Videophone Call
You can set whether to notify the other party that your
FOMA terminal supports the switch between a voice
call and a videophone call.
The other party cannot switch the call when set to
"Indication OFF".
You cannot set this function during a call or while
"
1
<Select image>
Setting the answer mode when you
receive a videophone call during
i-mode
As the multi access function cannot be used for
videophone, incoming videophone calls during
i-mode communication or while sending or receiving
mails are handled according to this setting.→p.360
1
Voice memo......Sets the image sent while
recording the voice memo.
Select the image to be sent:
Pre-installed......Sends only a message.
Original......Sends an image and a message.
To change the image, select an image from My
picture from "Change setting" of the function menu.
*
......Sends the image selected in
Chara-den
"Substitute image".
Function menu of Chara-den list screen→p.238
Priority order for Chara-den setting→p.71
To change the Chara-den, select a Chara-den from
Chara-den list from "Change setting" of the function
menu.
* : Available only when "Substitute image" is selected.
" appears.
Videophone settings screen (p.67)
"Ntfy switch-mode" Select any item:
Indication ON・Indication
deactivates the Ntfy switch-mode.
Check Indication......Displays the "Ntfy switch-
mode" setting.
Videophone settings screen (p.67) "V-
phone while packet" Select any item:
V-phone priority......Switches to the videophone
ringing screen. When you answer the incoming
videophone, i-mode communication is disconnected.
Packet downld priority......Rejects the incoming
videophone call.
Continued on next page
<Ntfy switch-mode>
OFF......Activates or
<V-phone while packet>
67