NTT docomo FOMA SO706i Instruction Manual page 429

Disconnecting the devices
The following procedure explains how to disconnect the FOMA USB Cable with Charge
Function 01/02 (optional).
Remove the FOMA USB Cable with Charge Function 01/02 from the USB
1
terminal of the PC
Pull the FOMA USB Cable with Charge Function 01/02 out horizontally while
2
pressing the release buttons of the external connector of FOMA USB Cable
Close the external connector cap of the FOMA terminal
3
NOTE
d When you connect and disconnect the FOMA USB Cable with Charge Function 01/02 repeatedly, wait for a while in
each step because the FOMA terminal may not recognize the PC correctly.
d Do not disconnect the FOMA USB Cable with Charge Function 01/02 during data communication because this
may cause the disconnection of communication, malfunction or loss of data.
d Keep pressing the release buttons of the external connector of the FOMA USB Cable with Charge Function 01/02
when pulling it out of the external connector of the FOMA terminal. Using excessive force to pull the cable may
cause malfunction.
8